# Filamente

## Material Infos

Folgende Materialen können in den [Drucker](https://wiki.oberlab.de/books/3d-druck/chapter/drucker "Drucker") verarbeitet werden

<table border="1" id="bkmrk-material-schmelzpunk" style="border-collapse: collapse; border-style: solid; width: 92.381%;"><thead><tr><th style="width: 12.9032%;">Material</th><th style="width: 20%;">Schmelzpunkt</th><th style="width: 23.2258%;">Druckbett Temperatur</th><th style="width: 43.7419%;">Einsatzzweck</th></tr></thead><tbody><tr><td style="width: 12.9032%;">[PLA](https://filamentworld.de/3d-druck-wissen/was-ist-pla)</td><td style="width: 20%;">180-220°C</td><td style="width: 23.2258%;">20-60°C</td><td style="width: 43.7419%;">Das Allzweck-Material. Viele Farben. Verformt sich allerdings bereits bei 50°. Biegsam aber nicht auf Dauer.</td></tr><tr><td style="width: 12.9032%;">[PETG](https://filamentworld.de/3d-druck-wissen/was-ist-petg/)</td><td style="width: 20%;">220-250°C</td><td style="width: 23.2258%;">50-80°C</td><td style="width: 43.7419%;">Robuster und fester, hält mehr Temperatur aus als PLA, daher eher für Outdoor, praller Sonne usw zu bevorziehen. Auch für andauerndes Biegen geeignet (zB Feder)</td></tr><tr><td style="width: 12.9032%;">[ABS](https://www.filamentpreis.de/was-ist-abs/)</td><td style="width: 20%;">210-250°C</td><td style="width: 23.2258%;">90-110°C</td><td style="width: 43.7419%;">Druck im geschlossenen Raum damit die Umgebungstemperatur konstant hoch bleibt</td></tr><tr><td style="width: 12.9032%;">Nylon</td><td style="width: 20%;">240-290°C</td><td style="width: 23.2258%;">55-65°C</td><td style="width: 43.7419%;">Druck im geschlossenen Raum damit die Umgebungstemperatur konstant hoch bleibt</td></tr><tr><td style="width: 12.9032%;">[TPU](https://help.prusa3d.com/de/article/flexible-materialien_2057)</td><td style="width: 20%;">210–245°C</td><td style="width: 23.2258%;">50-90°C</td><td style="width: 43.7419%;">Flexibel und biegsam. z.B. Dichtungen, Knöpfe von Fernbedienungen. Muss vor dem Druck getrocknet werden, zieht sehr schnell Wasser an, und zieht Fäden während des Drucks.

Shorehärte 98A (Flexfill 98A)

</td></tr></tbody></table>

## Profile für die Slicer

Falls der Slicer an sich kein passendes Profil für das Filament anbietet, haben wir eigene Profile angelegt. Diese sollten besser geeignet sein als die Default-Profile für PLA &amp; PETG.

Profile liegen in der Obercloud in /Fachbereiche/02\_3D-Druck/06\_Profile/Prusa-Slicer ([https://files.oberlab.de/f/309955)](https://files.oberlab.de/f/309955)) bzw /Fachbereiche/02\_3D-Druck/06\_Profile/Orca-Slicer ([https://files.oberlab.de/f/309956](https://files.oberlab.de/f/309956))

## Verfügbare Materialen &amp; Farben

### PLA

<table border="1" id="bkmrk-material-farbe-pla-1" style="border-collapse: collapse; border-style: solid; width: 87.2619%; height: 3475.89px;"><thead><tr style="height: 29.7969px;"><th style="width: 50%; height: 29.7969px;">Farbe</th><th style="width: 50%; height: 29.7969px;">  
</th></tr></thead><tbody><tr style="height: 317.625px;"><td style="width: 50%; height: 317.625px;">Army Red (PolyTerra)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/CEInkKq1CkwOHBZE-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/CEInkKq1CkwOHBZE-image.png)

Feuerrot ()

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/aWzB6VVGRwhJKvIb-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/aWzB6VVGRwhJKvIb-image.png)

</td><td style="width: 50%; height: 317.625px;">Black

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/hWMf5SYwVmXni1Vz-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/hWMf5SYwVmXni1Vz-image.png)

Black (dasFilament)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/m1bI2Nb1LWb0WSbO-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/m1bI2Nb1LWb0WSbO-image.png)

Charcoal Black (PolyTerra)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/O1EYBasRGKunr5Ua-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/O1EYBasRGKunr5Ua-image.png)

</td></tr><tr style="height: 317.781px;"><td style="width: 50%; height: 317.781px;">Blend oh my Gold (Prusament)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/Y7tELB3rVMxm4Cga-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/Y7tELB3rVMxm4Cga-image.png)

</td><td style="width: 50%; height: 317.781px;">Blue (Bambu)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/ohZVZ0CwvNhQ4H1q-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/ohZVZ0CwvNhQ4H1q-image.png)

</td></tr><tr style="height: 29.7969px;"><td style="width: 50%; height: 29.7969px;">Brown (ecoPLA)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/9UWKrRYbpgCkq7Bc-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/9UWKrRYbpgCkq7Bc-image.png)

</td><td style="width: 50%; height: 29.7969px;">Dark Grey (PrimaValue)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/iYFDSOPf6ZCNJrqC-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/iYFDSOPf6ZCNJrqC-image.png)

</td></tr><tr style="height: 29.7969px;"><td style="width: 50%; height: 29.7969px;">Galaxy Purple (Prusament)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/YnMr2LuXDbn8rlGY-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/YnMr2LuXDbn8rlGY-image.png)

</td><td style="width: 50%; height: 29.7969px;">Glow in the dark</td></tr><tr style="height: 324.172px;"><td style="width: 50%; height: 324.172px;">Green (Monoprice)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/5CVi3flrlJD0X8ZV-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/5CVi3flrlJD0X8ZV-image.png)

</td><td style="width: 50%; height: 324.172px;">Light Green (EcoPLA)

Lime Green (Prusament)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/7k340p8nQI4Vnb6g-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/7k340p8nQI4Vnb6g-image.png)

</td></tr><tr style="height: 311.188px;"><td style="width: 50%; height: 311.188px;">Himmelblau (das Filament)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/WBc8EALFvXm6FazX-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/WBc8EALFvXm6FazX-image.png)

</td><td style="width: 50%; height: 311.188px;">Lipstick red (Prusament)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/QSeBtFbqycC2TRZ4-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/QSeBtFbqycC2TRZ4-image.png)

</td></tr><tr style="height: 361.125px;"><td style="width: 50%; height: 361.125px;">Magenta (Bambu)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/tNNPlhhOQEMJKlBH-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/tNNPlhhOQEMJKlBH-image.png)

</td><td style="width: 50%; height: 361.125px;">Metal

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/XmKPx6EkMo1t5SZg-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/XmKPx6EkMo1t5SZg-image.png)

</td></tr><tr style="height: 340.344px;"><td style="width: 50%; height: 340.344px;">Pineapple Yellow (Prusament)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/vtfYpNfJUpUjTmHi-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/vtfYpNfJUpUjTmHi-image.png)

</td><td style="width: 50%; height: 340.344px;">Silver

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/g43TCpqdSzQqjHx6-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/g43TCpqdSzQqjHx6-image.png)

</td></tr><tr style="height: 380.406px;"><td style="width: 50%; height: 380.406px;">Tannengrün

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/700QWyY99IpgPgEC-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/700QWyY99IpgPgEC-image.png)

</td><td style="width: 50%; height: 380.406px;">White (Geetech)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/jkYxPYJLJdAp4WFX-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/jkYxPYJLJdAp4WFX-image.png)

</td></tr><tr style="height: 29.7969px;"><td style="width: 50%; height: 29.7969px;">Lavendel (Polyterra)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/jf6nmmI14CF9RSem-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/jf6nmmI14CF9RSem-image.png)

</td><td style="width: 50%; height: 29.7969px;"></td></tr></tbody></table>

### PETG

<table border="1" id="bkmrk-blue%2C-gold%2C-military" style="border-collapse: collapse; border-style: solid; width: 87.2619%; height: 3475.89px;"><tbody><tr style="height: 46.5938px;"><td style="width: 50%; height: 46.5938px;">Blue, Gold, Military Green, Ocean Blue, Prusa Orange, Silver, </td><td style="width: 50%; height: 46.5938px;">Jet black (Prusament #24292A)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/VmdUFbqVIw3UVPQE-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/VmdUFbqVIw3UVPQE-image.png)

</td></tr><tr style="height: 29.7969px;"><td style="width: 50%; height: 29.7969px;">  
</td><td style="width: 50%; height: 29.7969px;">Military Green (das Filament) 1+1

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/dNUodh54OcIB5DXH-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/dNUodh54OcIB5DXH-image.png)

</td></tr><tr style="height: 246.922px;"><td style="width: 50%; height: 246.922px;">Ocean blue (Prusament)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/xfZO0p7HuqS5KzJu-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/xfZO0p7HuqS5KzJu-image.png)

</td><td style="width: 50%; height: 246.922px;">Orange (Prusament) 1+1

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/4YN1R8MkIrLGTj72-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/4YN1R8MkIrLGTj72-image.png)

</td></tr><tr style="height: 271.688px;"><td style="width: 50%; height: 271.688px;">Weiss (Eryone) 1+1

</td><td style="width: 50%; height: 271.688px;">Yellow (Geetech)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/UPPPv39QKghcvcGB-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/UPPPv39QKghcvcGB-image.png)

</td></tr></tbody></table>

### ABS

<table border="1" id="bkmrk-green-white" style="border-collapse: collapse; border-style: solid; width: 87.2619%; height: 3475.89px;"><tbody><tr style="height: 29.7969px;"><td style="width: 50%; height: 29.7969px;">Green</td><td style="width: 50%; height: 29.7969px;">  
</td></tr><tr><td style="width: 50%;">White</td><td style="width: 50%;">  
</td></tr></tbody></table>

### TPU

<table border="1" id="bkmrk-flexfill-98a-%28filame" style="border-collapse: collapse; border-style: solid; width: 87.2619%; height: 3475.89px;"><tbody><tr><td style="width: 50%;">Flexfill 98A (Filamentum)

[![image.png](https://wiki.oberlab.de/uploads/images/gallery/2024-07/scaled-1680-/l10B4iicoaYIxita-image.png)](https://wiki.oberlab.de/uploads/images/gallery/2024-07/l10B4iicoaYIxita-image.png)

</td><td style="width: 50%;"></td></tr></tbody></table>